FPGA/FPGA-SOC Design

Intilop has several groups who can take on projects that range from a small 100k Gate FPGA design/integration to 10 M gate SOC Design/integration/Verification project or a small 2 inch X 2 inch board for an embedded design application to 22 inch X 26 inch, 24 layer multi-Giga bit blade server Board with multiple 1000+ pin BGA devices. In addition they can develop full scale firmware that ranges from developing en embedded RTOS to various device drivers to full scale enterprise software. They offer full turnkey hardware and software design capability

FPGA/FPGA-SOC Design

Network Infrastructure

Responsive Numbered List
  1. 10/100/1000 Mbit, Tri-speed Ethernet MAC with generic host-side interface targeted for Xilinx, Altera FPGAs, or ASIC design flow
  2. 802.3x compliant
  3. Sustained max packet transfer rate at 1G on Tx/Rx side
  4. 64 - 1500 Byte packets at minimum IFG
  5. Programmable Rx FIFOs up to 256 K Byte
  6. Programmable TX FIFOs up to 256 K bytes
  7. Programmable MAC address filters
  8. Statistics Counters
  9. 10/100 Mbit MAC with generic host-side interfaces targeted for Xilinx, Altera FPGAs, or ASIC design flow
  10. 802.3x compliant
  11. Programmable Rx FIFOs
  12. Programmable TX FIFOs
  13. Programmable MAC address filters
  14. Statistics Counters
  15. TCP/IP hardware accelerator engine for 10/100/1000 Mbit Ethernet MAC targeted for Xilinx, Altera FPGAs, or ASIC design flow
  16. Decode TCP header and commands, compute TCP checksum
  17. Decode IP header and command, compute IP checksum
  18. Direct interface to packet buffers
  19. Direct interface to PPC-XXX processors
  20. Programmable Rx FIFOs
  21. Programmable TX FIFOs
  22. System I/O-Bus interfaces for FPGA/ASIC
  23. PCI-X, PCI, PCI-Express Design/integration
  24. USB-2.0, USB-1.1 interface
  25. SCSI-x, Serial ATA design/integration
  26. VME, legacy bus interface design/integration
  27. Custom bus interface design
  28. All applicable firmware/driver development

FPGA/FPGA-SOC Design

Proven Standard IP Cores

Responsive Numbered List

Intilop has 3 support programs for each of the Product types:

  1. Giga Bit Ethernet MAC
  2. Tri-Speed Ethernet MAC
  3. Multi-Giga Bit Multi-Port Cross Point Switch
  4. USB 2.0 Controller
  5. USB 1.1 Controller
  6. PCIX-PCIX Bridge
  7. Viterbi Decoder
  8. 1024 Point FFT Core
  9. DDR1 / DDR2 SDRAM Controller
  10. PCI SDRAM Controller
  11. Ethernet-RF Bridge Controller
  12. Single Channel HDLC Controller
  13. PCI to PCI Bridge
  14. UART 16450 Compatible Macro
  15. UART 16550 Compatible Macro